精密轴加工设备 Equipment

" 专利证书 002
  • 专利证书 002

  • 专利证书 001

  • 电机轴质量检测报告12x117

  • 电机轴质量检测报告16x101

  • 专利证书

  • 电机轴质量检测报告

  • ISO9001-2008证书英文

    金日鑫轴业ISO9001-2008证书!宁波金日鑫轴业有限公司专业研发、生产各种微型电机轴、小型电机轴、高精度电机轴,年产3000万支各类型轴芯。www.jrxshaft.cn

  • 金日鑫轴业ISO9001-2008证书

    金日鑫轴业ISO9001-2008证书!宁波金日鑫轴业有限公司专业研发、生产各种微型电机轴、小型电机轴、高精度电机轴,年产3000万支各类型轴芯。www.jrxshaft.com

  • 微型电机轴、小型电机轴、高精度电机轴无心磨床

    宁波金日鑫轴业有限公司专业研发、生产各种微型电机轴、小型电机轴、高精度电机轴。

  • 各种微型电机轴、小型电机轴、高精度电机轴无心磨床

    各种微型电机轴、小型电机轴、高精度电机轴产品为电机转轴,电机轴广泛应用于汽车、家用电器、运动器材、食品机械等各种类型电机。ISO9002质量体系认证和专业的生产设备、精益的生产工艺,Various types of micro motor shaft, small motor shaft, high precision motor shaft, motor shaft, motor shaft is widely used in motor vehicles, household appliances, sports equipment, food machinery and other types of motor. ISO9002 quality system certification and professional production equipment, lean production process,

  • 数控车床

  • 无心磨床

  • 电机轴检验设备 Drive Shaft,Motor shaft inspection equipme

    1、电机轴外形尺寸符合型号技术要求。
    1, the motor shaft size is in line with the technical requirements of the model.
    2、电机轴工件应光亮,色泽均匀,不应有斑点、气泡、裂痕和粘附污物,电机轴工件件应光滑细密,不得有锈蚀、斑点、毛刺、镀件脱落现象,电机主轴应光滑无碰伤、无锈蚀缺陷(在常温状态下与自来水接触48小时无生锈)
    2, a motor shaft workpiece should be bright, uniform color, there should be no spots, bubbles, cracks and dirt adhesion, the motor shaft parts should be fine and smooth, no rust spots, burr, plating off phenomenon, the spindle motor should be smooth without bumps, no corrosion defects (in constant temperature state and water contact 48 hours without rust)

  • 精密转轴生产车间一角 Precision rotating shaft production wor

    宽敞明亮的车间保障维持良好的生产秩序,提高劳动生产率,保证精密转轴生产工作的顺利进行。
    Bright and spacious workshop to ensure good production order, improve labor productivity, ensure the smooth operation of the production of precision shaft.
    1、认真执行“三检”制度(自检、互检、巡检),操作人员对自己生产的产品要做到自检,检查合格后,方能转入下工序,下工序对上工序的产品进行检查,不合格产品有权拒绝接收。如发现质量事故时做到责任者查不清不放过、事故原因不排除不放过,预防措施不制定不放过。
    1, seriously implement the "three check" system (self inspection, mutual inspection, inspection and operation personnel to produce their own products to do self inspection, after passing the examination, can into the next process, process to process product inspection, unqualified products has the right to refused to accept. If the quality of the accident was found to be responsible for the investigation do not let go, the cause of the accident does not rule out the exclusion, the prevention measures are not developed.
    2、车间要对所生产的产品质量负责,做到不合格的材料不投产、不合格的半成品绝不流入下道工序。
    2, the workshop must be responsible for the quality of the products produced, do not pass the material is not qualified to put into operation, the semi-finished products will not flow into the next process.
    3、
    3,
    严格划分“三区”(待处理区、报废品区、流转区),做到标识明显、数量准确、处理及时。
    Strict division of the "three areas" (to be treated area, reported waste area, circulation area), so that obvious signs, the number of accurate, timely processing.

  • IMG_2576

  • IMG_0148

  • F1328C1090B217EA8A62244B219F86EC

  • d9429146-d4fb-4326-917f-bbeab4dcd6a3

  • 4259e1c9-c3b6-4a29-a748-445e63e117ef

  • 75ADF764954A8489D8241DBB6A9CC688

  • 6D8A67672478BC90612EE05D705D3131

  • 基研图纸212

  • 基研图纸212

专利证书 002

电话直呼
在线客服
在线留言
发送邮件
联系我们:
13567834455
0574-62992398
经理
点击这里给我发消息
接单
点击这里给我发消息
点击这里给我发消息
跟单
点击这里给我发消息
国际业务
点击这里给我发消息
点击这里给我发消息
还可输入字符200(限制字符200)
技术支持: 镜博士科技 | 管理登录